Careand cleaning of therange.
Thegasketisdesignedwith agap atthe
bottomto allow forproperair circulation.
Donot rubor clean thedoorgasket--
it has anextremelylow resistanceto
abrasion.
If younotice the gasketbecomingworn,
frayed ordamagedin anyway orif it
hasbecomedisplacedonthe door,
youshouldhaveit replaced,
Cleaning the Oven Door
Tocleantheinsideofthedoor:
Soap and water will normally do file
job. Hem T spmte_ing or spillovers may
require cleaning wifll a mild abrasive
cleaneL Soap-filled scorning pads may
Mso be used.
Donot allowfoodspillswitha highsugaroracU
content(suchas tomatoes,sauerkraut,fruitjuices
orpiefilling)toremainonthesurface.Theymay
causeadullspotevenaftercleaning.
Ifnecessary,youmayuseanovencleaner.Follow
thepackagedirections.
Clean the inside of the oven window
with a mild non-scratching cleaner and
a damp cloth.
Tocleantheoutsideof thedoor:
Use soap and water m thoroughly
clean file top, sides and flont of file
oven dooL Rinse well. You may also
use a glass cleaner m clean the glass on
the outside of the dooL Do not let
wamr drip into the vent openings.
Spillage of marinades, fluit
juices, tomato sauces and basung
mamrials containing acids may cause
discoloration and should be wiped up
immediately. When surface is cool,
clean and rinse.
Do not use oven cleaners, cleaning
powders or harsh abrasives on the
outside of the dooL
! ii iii!
Pull hinge locks clown to unlock.
Removal position
Lift-Off Oven Door
Thedoorisveryheavy.Be carefulwhen
removingandliftingthedoor.
Donot lift thedoorbythehandle.
Toremove the door:
[y] Fully open the dooL
Pull the hinge locks down toward
the door flame, to the unlocked
position. A tool, such as a small
fiat-blade screwdriver; may be
required.
@
Fimlly grasp both sides of the door
at the top.
(;lose door m file door removal
position, which is hMR,vay between
file broil stop position and dilly
closed.
IJft door up and out until the hinge
am1 is clear of the slot.
Toreplace the door:
[X] Fimlly gm_sp both sides of the door
at the top.
%
%
With the Bottom Hingearm
door at the edgeof
slot
satlle angle
as the
removal posiuon,
seat the
indentation of
the hinge arm
into the bottom edge of the hinge
slot. The notch in the hinge arm
illust be fully seared into the bottom
of the slot.
Fully open file dooL If the door will
not dilly open, the indentation is
not seared correctly in the bottom
edge of the slot.
Push the hinge locks up against the
flont flame of the oven cavity to the
locked position.
Push hinge locks up to lock.
(;lose the oven dooL
2O
To Next Page
Loading...
Need help?
General
