Before you call for service... GEAppliances.com
Troubleshooting Tips
Save time and money! Review the charts on the following pages
first and you may not need to call for service.
Causes What To Do
Control signals after You forgot to enter a , Pressthe Bake pad and desired temperature or the
entering cooking time bake temperature or Self Clean pad and desired clean time.
or delay start cleaning time.
Fooddoes not bake Oven controls improperly set. • Seethe Usingthe oven section.
or roast properly Rackposition is incorrect • Seethe Usingthe oven section.
or the rack is not level.
Incorrect cookware or • Seethe Usingthe oven section.
cookware of improper
size being used.
Oven thermostat . Seethe Adjust the oven thermostat Do it yourselfl
needs adjustment, section.
Fooddoes not Oven controls improperly set. • Hake sure you press the Broil Hi/Lo pad.
broil properly Improper rack • Seethe Broiling Guide.
position being used.
Foodbeing cooked • Usethe broiling pan and grid that came with your oven.
in a hot pan. Hake sure it is cool.
Cookware not suited • Usethe broiling pan and grid that came with your oven.
for broiling.
Aluminum foil used on the . Seethe Usingthe oven section.
the broiling pan and grid has
not been fitted properly and
slit as recommended.
In some areas the power
{voltage) may be low.
. Preheatthe broil element for 10 minutes.
Broil for the longest period of time recommended in
the Broiling Guide.
Clock and timer A fuse in your home • Replacethe fuse or resetthe circuit breaker.
do not work may be blown or the
circuit breaker tripped.
Oven controls improperly set. . See the Using the clock, timer and control lockout
section.
Oven light does Light bulb is looseor defective. • Tighten or replace the bulb.
not work
Pad operating light is broken. . Call for service.
27
To Next Page
Loading...
Need help?
General
