Tighten the outer two screws to the top of the
oven. (While tightening screws, hold the oven in
place against the wall and the top cabinet.)
14
4
Attach the oven to the top cabinet.
8
7
6
Cabinet Front
Cabinet Bottom Shelf
Filler Block
Oven Top
Equivalent to
Depth
of Cabinet
Recess
Insert 2 self-aligning screws
(
1
⁄4″-28 x 3
1
⁄4″) through outer
top cabinet holes. Turn two
full turns on each screw.
Tighten center
screw completely.
Install grease filters. See the Owner’s Manual
packed with the oven.
Installation Instructions
ADJUST THE EXHAUST
ADAPTOR
A5.
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Back of
Oven
Damper
CONNECTING DUCTWORK
1
2
Extend the house duct down to connect to
the exhaust adaptor.
Seal exhaust duct joints using duct tape.
A6.
House Duct
Self-Aligning Screw
5
MOUNT THE OVEN (continued)
A4.
NOTE: Use self-aligning screw,
1
⁄4″-28 x 2
5
⁄8″, on
JVM1790 and self-aligning screws,
1
⁄4″-28 x 3
1
⁄4″,
on JVM1490, SCA1000, and SCA1001.
To Next Page
Loading...
Need help?
General
