Attach the oven to the top cabinet by inserting
2 self-aligning screws through outer top cabinet
holes. Turn two full turns on each screw. Be sure
to keep power cord tight. Be careful not to pinch
the cord, especially when mounting flush to
bottom of cabinet.
3
14
5
4
Cabinet Front
Cabinet Bottom Shelf
Tighten the two screws to the top of the oven
completely. (While tightening screws, hold the oven
in place against the wall and the top cabinet.)
Filler Block
Oven Top
Equivalent
to Depth
of Cabinet
Recess
Install grease filters. See the Owner’s Manual
packed with the oven.
Installation Instructions
ADJUST THE EXHAUST ADAPTOR
A5.
Open the top cabinet and adjust the exhaust adaptor to
connect to the house duct.
CONNECTING DUCTWORK
1
2
Extend the house duct down to connect to
the exhaust adaptor.
Seal exhaust duct joints using duct tape.
A6.
House Duct
Self-Aligning Screw
MOUNT THE OVEN (continued)
A4.
Back of
Oven
Damper
To Next Page
Loading...
Need help?
General
