Replacement Procedures
8-20 LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8
8-3-7-4 Screen Size
NOTE: While it is believed to be unnecessary, it would not hurt to
disconnect the system from the network and remove all
transducer.
NOTE: Please ensure AC adapter is connected during system upgrade!
1. Do not remove the USB stick after the software reload if you
want to adjust the screen size.
NOTE: Do not remove the USB stick after the software reload if you
want to adjust the screen size.
2. Power on the system. The system will detect the USB
memory stick automatically.
3. Select choice [4] -> Next.
Figure 8-14. Screen size
4. Enter the ultrasound maintenance access password.The
password is GEWuXiChina and it is case sensitive.
To Next Page
Loading...
Need help?
General
