Installation
FINALIZE INSTALLATION
Place the burner grates over the burners. Press corner
of the grate to the cooktop. The grates should be seated
and should not rock.
The grill and griddle are secured with screws atthe
front. They are designed to be stationary and should not
be removed.
The griddle has two leveling screws beneath the rear
flue cover that can be used to adjust to the desired slope.
The center screw is for shipping purposes only and can
be removed.
INSTALLATION CHECKLIST
[] Double checkto make sure everything in this manual
has been completed, Rechecking steps will ensure
safe use of the range.
[] Make sure all controls are left in the OFFposition,
[] Make sure the flow of combustion and ventilation air
to the range is unobstructed,
[] The serial plate is located beneath the ledge trim on
the left side, just above the left knob. In addition to the
model and serial numbers, it tells you the ratings
of the burners and the type of fuel and pressure the
range was adjusted for when it left the factory.
[] When ordering parts, always include the serial
number, model number and a code letter to ensure
proper replacement parts.
[] Recheck Steps:
Double check to make sure everything in this manual
has been completed. Rechecking steps will ensure
safe use of the range.
14
To Next Page
Loading...
Need help?
General
