LCD KEYPAD
12
7. KEYPAD FUNCTIONS
7a. READING THE EVENT LOG
The control panel has an event log that can be retrieved using a master code. This log contains a listing
of the last 185 events along with date, time, and partition where the event occurred.
ACTION RESULT
Prompts to “Please Enter Your Code".
[master code]
Shows the most recent event.
Views the events from newest to oldest.
Views the events from oldest to newest.
The display contains the following information.
This screen shows an opening of Partition 3 on September 25
th
at 5:27 p.m. by user 75. The shows
that this event is not programmed to be reported to the central monitoring station.
POSSIBLE LOG MESSAGES
DISPLAY DESCRIPTION
TXlobat Transmitter Low Battery - The transmitter has a low battery.
ZN Lost Zone Lost - A wireless or multiplexed zone device is not reporting to the control.
Duress Duress - The control has been armed or disarmed with a Duress code.
Man Fire Manual Fire - Keypad “Fire” has been activated.
Aux 2 Auxiliary 2 - Keypad “Medical” has been activated.
Panic Panic - Keypad “Panic” has been activated.
KP Tamper Keypad Tamper - The keypad tamper has been activated.
BoxTamp Box Tamper - The box tamper circuit has been activated.
AC Fail AC Fail - AC failure has been detected.
OverCur Over Current - A short circuit of a power supply has occurred.
Srn Tamp Siren Tamper - A siren or speaker tamper has been detected.
Tel Flt Telephone Fault - A telephone fault or tamper has been detected.
Exp Trb Expansion Trouble - An expansion device or keypad is not reporting to the control.
Log Full Log Full - The event log is full.
Open 75
9/25 17:57 P3
Event
User or Zone ID
Date
(Month/Day)
Partition number
indicates an event
not reported
Time shown in
24-hour format
To Next Page
Loading...
Need help?
General