GE OSMONICS E4 Series User Manual

STEPS
1. While holding down the Clock Key (
⊗
), press the h key to advance to
the current minute.
2. While holding down the Clock Key (
⊗
), press the h key to advance to
the current minute.
3. While holding down the Clock Key (
⊗
), press the h key to advance to
the current minute.
NO
TE: If the h and m keys are held down for longer than 2 seconds,
the numbers will advance rapidly.
If the days are flashing, it indicates the day of the week was not set
when setting the time. The timer cannot be programmed unless the
day of the week is entered. Each year, in the spring, press the Button
to advance the time one hour (Daylight Savings Time). In the fall,
press the button to set the timer back one hour (Daylight Savings
Time).
2.15.3 Programming the Autoflush Timer Clock
This timer will accept up to 20 programs. Each program consists of the fol-
lowing:
1. ON/OFF Command
2. Time of Day (hours and minutes)
3. Single day or multiple days
IMP
ORTANT: The current time of day and day of the week must be set
prior to programming the timer. See Section 2.15.3 (Setting
Up the Autoflush Timer).
12

GE OSMONICS E4 Series Specifications

General

Brand	GE
Model	OSMONICS E4 Series
Category	Water Filtration Systems
Language	English