EasyManuals Logo
Home>GE>Microwave Oven>PEB3228 Series

GE PEB3228 Series User Manual

GE PEB3228 Series
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Installation Instructions
GROUNDING INSTRUCTIONS
For all cord connected appliances:
The microwave oven must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of electric
shock by providing an escape wire for the electric current. The
microwave oven is equipped with a cord having a grounding wire
with a grounding plug. The plug must be plugged into an outlet
that is properly installed and grounded.
WARNING: Improper use of the grounding plug can result in a
risk of electric shock. Consult a qualied electrician or serviceman
if the grounding instructions are not completely understood, or
if doubt exists as to whether the microwave oven is properly
grounded.
Do not use an extension cord. If the power supply cord is too short,
have a qualied electrician or serviceman install an outlet near the
microwave oven.
SAVE THESE INSTRUCTIONS
Electrical Requirements
Prepare Microwave Oven
Attach Rails
1. Unplug microwave oven before proceeding with installation.
2. Remove any loose items inside microwave oven.
3. Carefully turn microwave oven onto its top, with the door facing
forward (toward installer).
4. Align the two rails on the microwave oven bottom, as shown,
making sure the anges are forward and pointing up.
5. Secure the rails to the microwave oven bottom using four short
screws.
A. Rails (2)
B. Microwave oven bottom
C. Short screws (4)
D. Flanges
E. Door
Stick the Insulating Strip
1. Carefully return microwave oven to its upright position.
2. Stick the insulating strip to the louver on the enclosure to avoid
the heat releasing from the louver
EN-3
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, re, or
electrical shock.
Install according to all local governing codes and ordinances.
Required:
A 120 volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a
fuse or circuit breaker.
Recommended:
A time-delay fuse or time-delay circuit breaker.
A separate circuit serving only this microwave oven.
A. The insulating trip
B. Enclosure

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE PEB3228 Series and is the answer not in the manual?

GE PEB3228 Series Specifications

General IconGeneral
BrandGE
ModelPEB3228 Series
CategoryMicrowave Oven
LanguageEnglish

Related product manuals