GE PEB3228 Series User Manual

Installation Instructions
Prepare Cutout/Cabinet Opening
1. On the cutout oor, nd and mark the centerline.
2. Place the bottom duct in the opening, with the ange resting
against the bottom front facing of the opening.
3. Align the center arrows on the bottom duct with the centerline
drawn in Step 1 above.
4. Mark the three mounting holes through the bottom duct onto
the cutout oor.
5. Using a 7/64” drill bit, drill pilot holes into the three hole marks
shown in the gure above.
6. Realign and install the bottom duct with three short screws.
7. Using a 7/64” drill bit, drill pilot holes through the four bottom
duct ange mounting holes on the bottom front facing of the
cutout/cabinet opening.
A. Bottom duct ange
B. Mounting holes
A. Cutout oor
B. Centerline
C. Bottom duct
D. Bottom duct ange
E. Front facing
A. Short screws (3)
B. Bottom duct mounting holes
EN-4
Install the Microwave Oven
1. Carefully return microwave oven to its upright position.
2. Position microwave oven near cutout opening.
3. Plug in microwave oven.
4. Align the rails with the rail guides on the bottom duct.
A. Rail guides
B. Rails
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, re, or electrical
shock.
A. Bottom duct
B. Center arrows, aligned with centerline

GE PEB3228 Series Specifications

General

Brand	GE
Model	PEB3228 Series
Category	Microwave Oven
Language	English