% $ " &!
#
" @!
Set the image receptor, focal distance, field size, and compression paddle for the required
view.
For standard exposures, use 18x24 cm or 24x30 cm cassettes and a compression paddle
suitable to the format selected. Use of the Bucky is suggested for contact views.
Note: For best results in AOP, it is recommended to match the format of the compression
paddle with the format of the bucky when in contact mode, i.e. use the 18 x 24
compression paddle with the 18 x 24 bucky/cassette holder, and use the 24 x 30 paddle
with the 24 x 30 bucky.
Note:
B .! *#(! 9+4 -(( ! ( ; " !!
( ( " # " ! !
A;,: ! " ! " ! ( ( !
!# C ( " ( (( ! (!,
# " ( ! ; < '!( 0 "
(=
B1 ! ( " !
;,: ! , (!# ! ! .!
( ! ( ; " " "# ,
1 - .2 345- 65 7 857297 :- -
65 / 7: 7 86 6 345- 6 -5
84 5: : . 6 8 :4: 75. : 7-
7 : 345- 6 8 8:+
B %! # ! ;, ; ! ! ,
! ", ! ((
For additional exposures (selective exposure and/or magnification), the SID and
source-to-object distance can be modified.
No specific tube warm–up procedure is needed at power on.
Different field sizes and compression paddles can be used.
Note: Use of the Bucky is not recommended in magnification.
RAD PARAMETERS
The rad parameter selection depends on the focal track/filter configuration.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
