GE SIMON XT User Manual

Simon XT
User Manual
30
User codes 1 to 8
To change a user code:
1. Enter the System Programming menu.
2. Scroll up/down to Access Codes, then press Enter.
3. Scroll up/down to the user code you want to change, then press Enter.
4. The current value of the code now flashes.
5. Enter a new code (use correct length), then press Enter.
6. Press STATUS repeatedly to exit.
Initially, all user codes are blank. A user code can be deleted by pressing DISARM while the code is being
changed.
Duress code
To change the duress code:
1. Enter the System Programming menu.
2. Scroll up/down to Access Codes, then press Enter.
3. Scroll up/down to Duress Code, then press Enter.
4. The current value of the code now flashes.
5. Enter a new code (use correct length), then press Enter.
6. Press STATUS repeatedly to exit.
Initially, the duress code is blank. The duress code can be deleted by pressing DISARM while the code is
being changed.
Security
The Security menu contains the Download Enable option. This option determines whether your dealer can
access the system remotely.
To program the Download Enable option:
1. Enter the System Programming menu.
2. Scroll up/down to Security, then press Enter.
3. Scroll up/down to Download Enable, then press Enter.
4. The current value of this option now flashes On/Off.
5. Scroll up/down to the desired value, then press Enter.
6. Press STATUS repeatedly to exit.

GE SIMON XT Specifications

General

Brand	GE
Model	SIMON XT
Category	Security System
Language	English