Applications for the system include inspecting hard-to-reach or hard-to-see areas
of a building or a vehicle’s engine compartment or undercarriage. Video can be
viewed directly on the LCD or on an NTSC-format TV monitor through an included
A/V cable.
KEY FEATURES
• Grip and monitor are drop-resistant to height of 1m (3.3 ft.)
• Standard system includes 1m (39 in.) long, 12mm (0.47 in.) diameter)
camera-tipped probe. Longer and thinner interchangeable probes are
available (see page 9)
• Probes are oil-, water- and dust-proof to IP67 standard. The DCS312’s
splash-resistant wand-type grip and monitor meet the IP54 standard for
water ingress protection
• One-handed operation frees your other hand to use tools
• Included probe is in focus from 4 in. to 8 ft. (102mm to 2.4m)
• Flip video 180° to read labels right-side up and enlarge objects up to
2X to show details
• Includes three useful probe tip accessories (magnetic pickup, pickup hook,
45° mirror), A/V cable and lens cap
• Three-year warranty
SAFETY INSTRUCTIONS
• Do not use the system to inspect environments known or suspected to
contain exposed electrical wiring.
• Do not use it in the presence of flammable or explosive gases.
• Read and understand all of the instructions in this manual before using the
system.
• Stay alert, watch what you are doing, and use common sense. A moment of
distraction can result in serious personal injury.
• Do not over-reach. Keep proper footing and balance at all times, especially
where water is underfoot.
• Always use protective eyewear. A dust mask, non-skid safety shoes, a hard
hat or hearing protection may also be appropriate for certain inspection
environments and tasks.
• Do not use the system to perform medical inspections.
3
To Next Page
Loading...
Need help?
General