EasyManuals Logo
Home>General>Measuring Instruments>LD7

General LD7 User Manual

General LD7
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
INSTRUCTIONS
INSTALLING THE BATTERY:
Slide off the back cover to the battery compartment
and install two “AA” batteries.
POWER ON:
To turn the unit on (press and hold the yellow
button for 5 seconds) (three beeps indicates that
the unit is on).
BATTERY CHECK:
When first turned on, the detector performs a self
battery test. The LED’s will indicate the battery level,
with each LED indicating about 20% of battery level.
If all LED’s flash twice, the battery level is 100%
If only 4 LED’s flash twice, the battery level is 80%
If only 3 LED’s flash twice, the battery level is 60%
If only 2 LED’s flash twice, the battery level is 40%
If only 1 LED’s flash twice, the battery level is 20%,
change battery immediately.
It is strongly recommended that the battereis be re-
placed when the battery charge level drops to 40%
or below.
OPERATION
LIGHTNING DETECTION:
When the unit is on, the Blue LED will blink
continuously (two seconds on and three seconds
off). When a lightning strike is detected, the
detector will light the appropriate LED indicating
the approximate distance of the lightning strike.
(Either an audible beep or vibration may be
chosen to alert the user).
LD7_MAN_092910_4R.qxp:ps 9/29/10 2:47 PM Page 4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the General LD7 and is the answer not in the manual?

General LD7 Specifications

General IconGeneral
BrandGeneral
ModelLD7
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals