Gerber Technology MP+ Series User Manual

10
The offset adjusts the distance between two cartridges in the X axis.
The overlap adjusts the distance between two cartridges in Y axis.
OFFSET
OVERLAP
CALIBRATION
By adjusting it is possible to achieve aligned vertical lines.
To achieve it the plotter will print all different possibilities to let the user select the best one.
By adjusting it is possible to have continuous vertical lines, without gaps or overlaps.
To achieve it the plotter will print all different possibilities to let the user select the best one.
Offset
7
8
9
Overlap
7 8 9
This calibration needs special attention.
This is a critical adjustment because the other calibration steps are based on it.

Gerber Technology MP+ Series Specifications

General

Brand	Gerber Technology
Model	MP+ Series
Category	Plotter
Language	English