Gerber Technology MP+ Series User Manual

66
Menu
Setup
About
Consumption
SPARE PART
CODE
DESCRIPTION MAX COUNTER
EXPIRATION
TIME
205245 Paper motor 8.000 hours
205162 Inverter - 2 years
180: 204196
220: 204382
Head at cables 20.000.000 cycles 3 years
205246 Deck motor 8.000 hours
180: 205224
220: 205225
Head drive cable 20.000.000 cycles
205261
Brakes Set 250.000 meters
205264
Brakes - Light
250.000 meters
205263
Brakes - Medium
250.000 meters
205262
Brakes - Heavy Duty
250.000 meters
205219 Wheel cleaners 250.000 meters 2 years
205265 Cutter knife 3.500 cuts 2 years
RFID
RFID
RFID
RFID
RFID
RFID
PARTS LIFE CYCLE
Some plotter parts are recommended to be replaced to avoid a malfunction. These will prevent defective
work, breakdowns and serious damage.
Plotter will also inform you when RFID parts must be replaced if they have been previously activated
(correctly passed on plotter RFID zone).
Here below the parts that must be checked and it’s expected lifetime:
Please check counter values in rmware display and
note when parts are replaced to have the plotter
always ready to work.
694500687
694500566
694500547
694500725
694500728
694500727
694500726
694500715
694500729
180: 694500667
220: 694500668
180: 694500619
220: 694500620

Gerber Technology MP+ Series Specifications

General

Brand	Gerber Technology
Model	MP+ Series
Category	Plotter
Language	English