Gigabyte BRIX User Manual

- 26 -
System Hardware Installation
3-2 Installing the M.2 SSD
WARNING!
Failure to properly turn off the system before you start installing components may cause serious
damage.
Follow these instructions to Install the M.2 SSD:
1. Remove both the small screw secured to the M.2 SSD screw hole.
(
取下 M.2 SSD 插槽螺絲孔上的螺絲
󾗘
2. Carefully insert the M.2 SSD into slot.
(
小心地把 M.2 SSD 裝入 插槽
󾗘
3. Insert the tab on the thermal plate into the slit near the connector, then secure the thermal plate and M.2
SSD in place with the previously removed screw.
(
把散熱片裝入插槽旁邊的缺口，然後用之前取下的螺絲將 M.2 SSD 與散熱片固定
󾗘
1
2
3
M.2 SSD: Installation der M.2 2280 SSD / SSD M.2 : Comment installer le SSD M.2 2280 / SSD M.2: Como
instalar el SSD M.2 2280 / M.2 SSD: Como instalar o M.2 2280 SSD / SSD M.2: Come installare l'SSD M.2
2280 / M.2 SSD: Установка модуля M.2 2280 SSD / M.2 SSD: Instalacja dysku SSD M.2 2280 / M.2 SSD: M.2
2280 SSD nasıl Yüklenir / M.2 SSD
󽘪
M.2 2280 SSD
󲶿󸄅󳿑󳑎
/ M.2 SSD
󽘪󲤗󱠇󲶿󸃔
M.2 2280 SSD /
M.2 SSD
󽘪
M.2 2280 SSD
󳿑󴰢
/ M.2 SSD: M.2 2280 SSD
󻺓󼯇󾖴󻦘󻨄
NOTE!
The illustrations of the M.2 SSD/Heatsink installation shown are for reference only.
Please follow the installation steps of actual purchased.
注意! 安裝 M.2 SSD / 散熱片 圖示僅參考，請依照實際購買的 M.2 SSD / 散熱片安裝步驟說明。

Gigabyte BRIX Specifications

General

Brand	Gigabyte
Model	BRIX
Category	Desktop
Language	English