- 51 - BIOS Setup
CPU Vcore/Dram Voltage/+3.3V/+12V &
Displays the current system voltages.
CPU/PCH/System Temperature &
Displays current CPU/Chipset/System temperature.
CPU/System Fan Speed &
Displays current CPU/system fan speeds.
CPU Warning Temperature &
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS will
emit warning sound. Options are: Disabled (default), 60
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
o
F, 90
o
C/194
o
F.
CPU/System Fan Fail Warning &
Allows the system to emit warning sound if the CPU fan or system fan is not connected or fail. Check the
fan condition or fan connection when this occurs. (Default: Disabled)
CPU/3rd Fan Speed Control (CPU_FAN and SYS_FAN3 Connectors) &
Allows you to determine whether to enable the CPU/system fan speed control function and adjust the fan
speed.
Normal Allows the CPU/system fan to run at different speeds according to the CPU/system
temperature. You can adjust the fan speed with EasyTune based on your system
requirements. (Default)
Silent Allows the CPU/system fan to run at slow speeds.
Manual Allows you to control the CPU/system fan speed under the Slope PWM item.
Disabled Allows the CPU/system fan to run at full speeds.
Slope PWM &
AllowsyoutocontroltheCPU/systemfanspeed.ThisitemiscongurableonlywhenCPU/3rd Fan Speed
Control is set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.
1st/4th System Fan Speed Control (SYS_FAN1 and SYS_FAN4 Connectors) &
Allows you to determine whether to enable the system fan speed control function for the system fans
connected to the SYS_FAN1 and SYS_FAN4 connector and adjust the fan speed.
Normal Allows the system fans to run at different speeds according to the system temperature. You
can adjust the fan speed with EasyTune based on your system requirements. (Default)
Silent Allows the system fans to run at slow speeds.
Manual Allows you to control the system fan speed under the Slope PWM item.
Disabled Allows the system fans to run at full speeds.
Slope PWM &
Allowsyoutocontrolthesystemfanspeed.Thisitemiscongurableonlywhen1st/4th System Fan Speed
Control is set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.
2nd System Fan Speed Control (SYS_FAN2 Connector) &
Allows you to determine whether to enable the system fan speed control function for the system fan
connected to the SYS_FAN2 connector and adjust the fan speed.
Normal Allows the system fan to run at different speed according to the system temperature. You
can adjust the fan speed with EasyTune based on your system requirements. (Default)
Silent Allows the system fan to run at slow speeds.
Manual Allows you to control the system fan speed under the Slope PWM item.
Disabled Allows the system fan to run at full speeds.
Slope PWM &
Allowsyoutocontrolthesystemfanspeed.Thisitemiscongurableonlywhen2nd System Fan Speed
Control is set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
