- 31 -
Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities &
Species the boot order for a specic device type, such as hard drives, optical drives, oppy disk drives,
and devices that support Boot from LAN function, etc. Press <Enter> on this item to enter the submenu that
presents the devices of the same type that are connected. This item is present only if at least one device
for this type is installed.
Bootup NumLock State &
Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default:
Enabled)
Full Screen LOGO Show &
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the
GIGABYTE Logo when the system starts up. (Default: Enabled)
PCI ROM Priority &
Allows you to determine which Option ROM to launch. Options are Legacy ROM and EFI Compatible ROM.
(Default: EFI Compatible ROM)
Limit CPUID Maximum &
(Note)
Allows you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows XP
operating system; set this item to Enabled for legacy operating system such as Windows NT4.0. (Default:
Disabled)
Execute Disable Bit &
(Note)
Enables or disables Intel Execute Disable Bit function. This function may enhance protection for the computer,
reducing exposure to viruses and malicious buffer overow attacks when working with its supporting software
and system. (Default: Enabled)
Intel Virtualization Technology &
(Note)
Enables or disables Intel Virtualization Technology. Virtualization enhanced by Intel Virtualization Technology
will allow a platform to run multiple operating systems and applications in independent partitions. With
virtualization, one computer system can function as multiple virtual systems. (Default: Disabled)
VT-d &
(Note)
Enables or disables Intel Virtualization Technology for Directed I/O. (Default: Enabled)
Administrator Password &
Allows you to congure an administrator password. Press <Enter> on this item, type the password, and
then press <Enter>. You will be requested to conrm the password. Type the password again and press
<Enter>. You must enter the administrator password (or user password) at system startup and when entering
BIOS Setup. Differing from the user password, the administrator password allows you to make changes to
all BIOS settings.
User Password &
Allows you to congure a user password. Press <Enter> on this item, type the password, and then press
<Enter>. You will be requested to conrm the password. Type the password again and press <Enter>. You
must enter the administrator password (or user password) at system startup and when entering BIOS Setup.
However, the user password only allows you to make changes to certain BIOS settings but not all.
To cancel the password, press <Enter> on the password item and when requested for the password, enter the
correct one rst. When prompted for a new password, press <Enter> without entering any password. Press
<Enter> again when prompted to conrm.
(Note) This item is present only when you install a CPU that supports this feature. For more information about
Intel CPUs' unique features, please visit Intel's website.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
