To Next Page

To Previous Page

GA-G33M-DS2R/S2 Motherboard - 36 -

English

2-1 Startup Screen

The following screen may appear when the computer boots.

Function Keys:

<DEL>: BIOS Setup/Q-Flash

Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.

<F9>: Xpress Recovery2

If you have ever entered Xpress Recovery2 to back up hard drive data using the motherboard

driver disk, the <F9> key can be used for subsequent access to XpressRecovery2 during the

POST. For more information, refer to Chapter 4, "Xpress Recovery2."

<F12>: Boot Menu

Boot Menu allows you to set the first boot device without entering BIOS Setup. In Boot Menu, use

the up arrow key < > or the down arrow key< > to select the first boot device, then press <Enter>

to accept. To exit Boot Menu, press <Esc>. The system will directly boot from the device

configured in Boot Menu.

Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot

order will still be based on BIOS Setup settings. You can access Boot Menu again to change the first

boot device setting as needed.

<End>: Q-Flash

Press the <End> key to access the Q-Flash utility directly without having to enter BIOS Setup first.

Award Modular BIOS v6.00PG, An Energy Star Ally

Intel G33 BIOS for G33M-DS2R D26

<DEL>: BIOS Setup/Q-Flash <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash

03/30/2007-G33-ICH9R-6A79OG02C-00

Motherboard Model

BIOS Version

Function Keys

Gigabyte GA-G33M-DS2R User Manual

Questions and Answers: