GA-MA790FX-DQ6 Motherboard - 54 -
English
2-9 MB Intelligent Tweaker(M.I.T.)
• Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory
and reduce the useful life of these components. This page is for advanced users only and
we recommend you not to alter the default settings to prevent system instability or other
unexpected results. (Inadequately altering the settings may result in system's failure to
boot. If this occurs, clear the CMOS values and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set
the System Voltage Control item to Auto to optimize the system voltage settings.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Clock Ratio [Auto]
CPU Host Clock Control [Auto]
x CPU Frequency (MHz) 200
HT Link Frequency [Auto]
PCIE Clock (MHz) [Auto]
Set Memory Clock [Auto]
x Memory Clock DDR 533
` DRAM Configuration [Press Enter]
********
System Voltage Optimized
********
System Voltage Control [Normal]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.3500V
DDR2 Voltage Control [Normal]
Chipset Voltage Control [Normal]
PCIE Voltage Control [Normal]
HTT Voltage Control [Normal]
HTR Voltage Control [Normal]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
To Next Page
Loading...
Need help?
General
