EasyManuals Logo
Home>Gigabyte>Motherboard>GA-P31-ES3G

Gigabyte GA-P31-ES3G User Manual

Gigabyte GA-P31-ES3G
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Hardware Installation- 13 -
1-3 Installing the CPU and CPU Cooler
Read the following guidelines before you begin to install the CPU:
Make sure that the motherboard supports the CPU.
(Go to GIGABYTE's website for the latest CPU support list.)
Always turn off the computer and unplug the power cord from the power outlet before
installing the CPU to prevent hardware damage.
Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you
may locate the notches on both sides of the CPU and alignment keys on the CPU socket.)
Apply an even and thin layer of thermal grease on the surface of the CPU.
Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and
damage of the CPU may occur.
Set the CPU host frequency in accordance with the CPU specifications. It is not recom-
mended that the system bus frequency be set beyond hardware specifications since it
does not meet the standard requirements for the peripherals. If you wish to set the frequency
beyond the standard specifications, please do so according to your hardware specifications
including the CPU, graphics card, memory, hard drive, etc.
1-3-1 Installing the CPU
A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
NotchNotch
Alignment Key
Alignment Key
LGA 775 CPU
LGA775 CPU Socket
Pin One Corner of the CPU Socket
Triangle Pin One Marking on the CPU

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gigabyte GA-P31-ES3G and is the answer not in the manual?

Gigabyte GA-P31-ES3G Specifications

General IconGeneral
Memory voltage1.8 V
Number of memory slots2
Maximum internal memory4 GB
Processor socketLGA 775 (Socket T)
Processor manufacturerIntel
USB 2.0 connectors8
Power fan connectorYes
Number of SATA connectors4
Number of Parallel ATA connectors1
S/PDIF in portNo
Headphone outputs3
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports0
Audio chipRealtek ALC888
Audio output channels5.1 channels
Motherboard form factorATX
Compatible operating systemsMicrosoft Windows Vista, XP, 2000
BIOS typeAWARD
LAN controllerRealtek RTL8111C
Networking features10/100/1000 Mbit
Trial softwareNorton Internet Security
Weight and Dimensions IconWeight and Dimensions
Depth194 mm
Width305 mm

Related product manuals