EasyManuals Logo

Gigabyte GA-P41T-D3 User Manual

Gigabyte GA-P41T-D3
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
- 59 - Unique Features
4-1 Xpress Recovery2
Chapter 4 Unique Features
Xpress Recovery2 is a utility that allows you to quickly compress and
back up your system data and perform restoration of it. Supporting NTFS,
FAT32, and FAT16 le systems, Xpress Recovery2 can back up data on
PATA and SATA hard drives and restore it.
Before You Begin:
• Xpress Recovery2 will check the rst physical hard drive
(Note)
for the operating system. Xpress Recovery2
can only back up/restore the rst physical hard drive that has the operating system installed.
• As Xpress Recovery2 will save the backup le at the end of the hard drive, make sure to leave enough un-
allocated space in advanced (10 GB or more is recommended; actual size requirements vary, depending
on the amount of data).
• It is recommended to back up your system soon after the operating system and drivers are installed.
• The amount of data and hard drive access speed may affect the speed at which the data is backed up/
restored.
• It takes longer to back up a hard drive than to restore it.
System Requirements:
• At least 512 MB of system memory
• VESA compatible graphics card
• Windows XP with SP1 or later, Windows Vista
• Xpress Recovery and Xpress Recovery2 are different utilities. For example, a backup le created
with Xpress Recovery cannot be restored using Xpress Recovery2.
• USB hard drives are not supported.
• Hard drives in RAID/AHCI mode are not supported.
Installation and Conguration:
Turn on your system to boot from the Windows Vista setup disk.
A. Installing Windows Vista and Partitioning the Hard Drive
(Note) Xpress Recovery2 checks the rst physical hard drive in the following sequence: The rst PATA IDE connector,
the second PATA IDE connector, the rst SATA connector, the second SATA connector and so forth. For example,
when hard drives are attached to the rst IDE and the rst SATA connectors, the hard drive on the rst IDE
connector is the rst physical drive. When hard drives are attached to the rst and second SATA connectors, the
hard drive on the rst SATA connector is the rst physical drive.
Step 1:
Click Drive options.
Step 2:
Click New.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gigabyte GA-P41T-D3 and is the answer not in the manual?

Gigabyte GA-P41T-D3 Specifications

General IconGeneral
Non-ECCNo
Memory voltage1.5 V
Number of memory slots2
Maximum internal memory4 GB
Supported memory clock speeds1333 MHz
Processor socketLGA 775 (Socket T)
Processor manufacturerIntel
Power fan connectorYes
Number of SATA connectors4
Number of EATX power connectors1
Headphone outputs3
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports0
Audio chipRealtek ALC888 / ALC892
Audio output channels7.1 channels
Motherboard form factorATX
Compatible operating systemsWindows 7/Vista/XP
Parallel processing technology supportNot supported
LAN controllerRealtek RTL8111C
Networking featuresGigabit Ethernet
BIOS typeAWARD
ACPI version1.0
BIOS memory size16 Mbit
Weight and Dimensions IconWeight and Dimensions
Depth194 mm
Width305 mm

Related product manuals