To Next Page

To Previous Page

BIOS Setup - 30 -

2-1 Startup Screen

The following screens may appear when the computer boots.

A. The LOGO Screen (Default)

B. The POST Screen

Function Keys:

<TAB>: POST SCREEN

Press the <Tab> key to show the BIOS POST screen. To show the BIOS POST screen at system start-

up, refer to the instructions on the Full Screen LOGO Show item on page 44.

<DEL>: BIOS SETUP\Q-FLASH

Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.

<F9>: XPRESS RECOVERY2

If you have ever entered Xpress Recovery2 to back up hard drive data using the driver disk, the <F9>

key can be used for subsequent access to Xpress Recovery2 during the POST. For more information,

refer to Chapter 4, "Xpress Recovery2."

<F12>: BOOT MENU

 BootMenuallowsyoutosettherstbootdevicewithoutenteringBIOSSetup.InBootMenu,usetheup

arrow key <

> or the down arrow key <

>toselecttherstbootdevice,thenpress<Enter>toaccept.

ToexitBootMenu,press<Esc>.ThesystemwilldirectlybootfromthedeviceconguredinBootMenu.

Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot order

willstillbebasedonBIOSSetupsettings.YoucanaccessBootMenuagaintochangetherstbootde-

vice setting as needed.

<END>: Q-FLASH

 Pressthe<End>keytoaccesstheQ-FlashutilitydirectlywithouthavingtoenterBIOSSetuprst.

Motherboard Model

BIOS Version

Award Modular BIOS v6.00PG

P67A-UD3R-B3 F4d

<DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash

11/12/2010-P67-7A89UG03C-00

Function Keys

Gigabyte GA-P67A-UD3R-B3 User Manual

Questions and Answers: