GA-VM900M Motherboard - 34 -
English
2-3 Integrated Peripherals
SATA Controller
Enabled Enable the onboard SATA controller. (Default value)
Disabled Disable the onborad SATA controller.
SATA Controller Mode
IDE Set the onboard SATA mode to IDE. (Default value)
RAID Set the onboard SATA mode to RAID.
IDE DMA transfer access
Enabled Enable DMA (Direct Memory Access) mode for the IDE device(s). (Default value)
Disabled Turn off DMA mode for the IDE device(s) and let it operate in PIO (Programmed
Input/Output) mode.
OnChip IDE Channel0
Enabled Enable the onboard 1st channel IDE port. (Default value)
Disabled Disable the onboard 1st channel IDE port.
OnChip IDE Channel1
Enabled Enable the onboard 2nd channel IDE port. (Default value)
Disabled Disable the onboard 2nd channel IDE port.
IDE Prefetch Mode
Enabled Enable IDE data buffer to enhance HDD transfer speed. (Default value)
Disabled Disable IDE data buffer for the system stability.
Azalia HDA Controller
Auto Auto detect the onboard Azalia audio function. (Default value)
Disabled Disable this function.
LAN Controller
Enabled Enable the onboard LAN function. (Default value)
Disabled Disable this function.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
SATA Controller [Enabled]
SATA Controller Mode [IDE]
IDE DMA transfer access [Enabled]
OnChip IDE Channel0 [Enabled]
OnChip IDE Channel1 [Enabled]
IDE Prefetch Mode [Enabled]
Azalia HDA Controller [Auto]
LAN Controller [Enabled]
USB 1.1 Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
OnBoard LAN Boot ROM [Disabled]
Legacy USB storage detect [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x EPP Mode Select EPP1.7
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`