Appendix- 71 -
English
AC'97 Audio Configuration:
To enable the front panel audio connector to sup-
port AC'97 Audio mode, go to the Audio Control
Panel and click the Jack tab.
Click the Configuration button and do not select
the Auto mute front speaker when Headphone
plug in check box. This action completes the
AC'97 Audio configuration.
Auto-detecting:
In the Audio Control Panel, click the Jack tab. Click
the Auto Show Dialog checkbox will enable the
Retasking function.
A Retasking dialog will show up when you plug
the audio device into the jacks. Click the right
output device checkbox that you connect in, then
press OK.