- 25 - Appendix
5. Appendix
5.1.HowtoReashtheBIOSinMS-DOSMode
1. Extract the downloaded Zip le to your hard disk(s) or oppy disk. This procedure assumes drive A.
2. Restart the computer in MS-DOS mode. (You may need a startup disk to restart the computer in
MS-DOS mode.)
3. Change the command prompt to A:\>.
4. To back up the current BIOS, at the A:\> prompt, type
[BIOS ash utility name] -s [BIOS
le name]
(example: gvf19 -s n210oc5i.F1) and press Enter.
5. To ash BIOS, at the A:\> prompt, type
[BIOS ash utility name] -p [BIOS le
name]
(example: gvf19 -p n210oc5i.F2) and press Enter.
6. Wait until it's done, then restart your computer.