Gigabyte GV-N210SL-1GI User Manual

- 9 - Hardware Installation
2.2. Hardware Installation
Now that you have prepared your computer, you are ready to install your graphics card.
Step 3.
Plug the display cable into your card; then turn on the computer
and monitor. To connect a D-Sub monitor to your graphics card,
use the D-Sub connector. To connect a at panel display to your
graphics card, use the DVI-I connector. To connect an HDMI
monitor to your graphics card, use the HDMI connector.
Connect a D-Sub monitor
Connect an HDMI monitor
To Flat Panel DisplayTo D-Sub MonitorTo HDMI Monitor
Step 1.
Locate the PCI Express x16 slot. If necessary, remove the metal
cover from this slot; then align your graphics card with the PCI
Express x16 slot, and press it in firmly until the card is fully
seated.
Step 2.
Replace the screw to fasten the card in place, and replace the
computer cover.
Make sure that the gold edge connector of the graphics card is
securely inserted.
Connect a at panel display

Gigabyte GV-N210SL-1GI Specifications

General

CUDA	No
Shader clock	1237 MHz
Graphics processor	GeForce 210
Maximum resolution	2560 x 1600 pixels
Processor frequency	520 MHz
Graphics processor family	NVIDIA
Maximum analog resolution	2048 x 1536 pixels
Parallel processing technology support	2-Way SLI
Memory bus	64 bit
Memory clock speed	1200 MHz
Graphics card memory type	GDDR3
Discrete graphics card memory	1 GB
DVI-D ports quantity	0
DVI-I ports quantity	1
Full HD	Yes
OpenGL version	3.1
DirectX version	10.1
Shader model version	-
Form factor	Half-Height/Half-Length (HH/HL)
Cooling type	Passive
Bracket height	Full-Height (FH)

Weight and Dimensions

Depth	24 mm
Height	121 mm
Weight	197 g