Maintenance 81
Code 429159
Rev. 15/0717
15.7. Checking the condition of the bearing housing seals
Only by the Authorised Technical Service.
At regular intervals check that no water is leaking out of the bearing drain pipe located at the back of the washer
at the bottom. Water loss indicates that the seals are in poor condition and need to be replaced.
15.8. General revision
Only by the Authorised Technical Service.
As preventive maintenance action, it is very important to ask the Authorised Technical Service for a periodic
overhaul of the washing machine.
Recommended periodicity: every year or each 2000 washing cycles.
15.9. Recovery tank cleaning
Only by qualified personnel.
Action to be carried out only in machines with recovery tank installed.
Procedure described in section 13. System Tools.
To Next Page
Loading...
Need help?
General
