GIRBAU RMG040 User Manual

Modification of the program contents 24
Cod. 598144
Rev. 11/0717
6.3. Definition of phases
PHASE
S
DEFINITION
1
2
3
4
5
6
Pre-wash. Optional execution phase.
Wash. Obligatory execution phase. The mixing of hot and cold water and/or water
heating is permitted.
First Rinse. Obligatory execution phase.
Second rinse. Optional execution phase.
Third rinse. Optional execution phase.
Fourth rinse. Obligatory execution phase.
6.4. Definition of programmable functions and values for each phase
FUNCTION
CONCEPT
OPTIONS
Ph
Phase execution
Ph-Y
Phase can be executed
Ph-N
Phase cannot be executed
L
Bath level
L-0
Phase without water inlet
L-1
Low level
L-2
Medium level
L-3
High level
L-4
Extra high level
C / F
Wash phase
temperature
0 / 80
Programmable range in degrees Celsius
32 / 176
Programmable range in degrees Fahrenheit
n.p.
Temperature cannot be programmed in the phase
d
Dosings
d-0
Phase without dosing
d-1
Dosing of powdered detergent
d-2
Dosing of powdered detergent
d-3
Dosing of liquid dosing
d-4
Dosing of liquid dosing
t
Dosing time
1 … 99
Programmable time in seconds
r
Rotation type
r-1
Heavy duty rotation: 25 sec. ON - 5 sec. OFF
r-2
Normal rotation: 15 sec. ON - 15 sec. OFF
r-3
Light rotation: 5 sec. ON - 25 sec. OFF
rt
Rotation time
(in minutes)
0
Phase without rotation
1...6
Programmable range in the pre-wash phase
1...20
Programmable range in the wash phase
1...6
Programmable range in the rinse phase
E
Bath drain
0
Phase without draining
1
Drain + wash speed
2
Drain + positioning speed
3
Drain + low spin speed
4
Drain + medium spin speed
5
Drain + medium/high spin speed
6
Drain + high spin speed
Et
Spin time
n.p.
Time not programmable
2...3
Programmable range in intermediate spins
2...7
Programmable range in E-4 - E-6 spins
For further information on the programmable functions, see section below.

GIRBAU RMG040 Specifications

General

Brand	GIRBAU
Model	RMG040
Category	Washer
Language	English