Modification of operation parameters 33
Cod. 598144
Rev. 11/0717
First level of suds prevention
Second level of suds prevention
Third level of suds prevention
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.
Prices allocation according to hour band
Option possible only on machines with clock option installed.
The activation of option Hr-1 modifies the contents of the CASH menu, allowing programming of three different
prices for each program and permits the access to the CALE menus: definition of hour band for each day of the
week and Hour: setting the clock and programming the day of the week.
Single price for each program
Variable price based on the established calendar
Note: The modification of Hr-1 to Hr-0 programming causes the washing machine to automatically select as
price of each program the values programmed as Low value.
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.
Viewing the temperature value
Available only for heated units.
It allows or prevents the water temperature display during the wash phase heating.
No temperature value displayed
Temperature value displayed
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.
Network identifier
This parameter assigns a network identifier to the washer. This identifier enables the communication of the
washer with the environment through a protocol based on RS-485.
Selected option by default: Id-0.
For further information, see the Communication Protocol Instruction Manual.
Press the 1 key. The display shows Mod.
The 2 / 4 keys allow the access to other menus.
To exit the ADVANCED MODE press the STOP key.
To Next Page
Loading...
Need help?
General
