NL-90 is used to control the operation of navigation and signal lights on board ships. Its modular construction makes
it suitable for any ship size. Color graphic LCD display with touch panel provides user-friendly interface which is very
easy to operate. Built-in software allows easy programming of lights configuration in panel itself without requirement
of external devices.
It is available in 230VAC or 115VAC version depending on lights power supply. All versions have dual power supply
(main and spare) with automatic change-over.
Maximum configuration is 13 double navigation lights and 26 signal lights.
NL-90 continuously monitors status of lights. In case of fault detection in lights circuit or lights alarms and, if exsisting,
automatically switches to spare light. In this way it provides more safety. Input modules with manual lamp acctivation
feature allow llights operation even in case of electronic failure.
- Color LCD display with
touch panel
- Automatic switch-over to spare
light in case of main navigation
light malfunction
-
and light presentation
.
Independent lights circuit
connection
on display
- Fully programmable lights
presentation properties (name,
color, number, position, spare
light existence)
- Programmable signal mast shape
and viewing direction marking
- Switch-on group of lights by
single button
- Switch-off all lights by single
button
- LED lights can be connected
- Modules interconnections via
original cables with connectors
POWER/
SYSTEM
FAILURE
MAIN
SUPPLY
SPARE
SUPPLY
POWER
ON / OFF
2
1. Overview
1.1 Description
NL90 Touch screen Navigational Light Controller
To Next Page
Loading...
Need help?
General
