Glamox ITNSL-01T User Manual

- PROBLEM IN COMMUNICATION OR FIRST NAVIGATION* LIGHTS
MODULE MALFUNCTION IS DETECTED. CHECK LIGHTS!
* or some other module
IF YELLOW BACKGROUND LASTS LONG, SWITCH LIGHTS BY
SWITCHES ON THE MODULE.
This message appears in case when communication between main unit
and input module exists, but with very often errors making it unreliable.
After acceptance, yellow background (1) for navigation or signal lights (or
both) will be displayed, depending on input module in subject. If light
symbol (2) occurs, error is encounter just for that lantern.
If yellow background lasts long (a few minutes), operation is unreliable,
lanterns have to be checked and, if necessary, switch on/off manually by
switches on the input module.
21
- FIRST NAVIGATION LIGHTS MODULE IS NOT RESPONDING.
* or some other module
SWITCH EQUIPMENT OFF/ON. IF THE PROBLEM ISN'T SOLVED,
USE THE SWITCHES ON THE MODULE TO SWITCH LIGHTS ON/OFF.
This message can be issued only for input module which "is registered" in
main unit. It appears in case when input module doesn't respond to the main
unit during normal operation, permanently for about 30 seconds period. If
an input module earlier registered didn't respond during turning on process,
it will be "unregistered".
- FIRST NAVIGATION (or some other) LIGHTS MODULE IS NOT
REGISTERED.
* or some other module
This message appears during turning on light assigned to an output of non-
existing or unregistered module.
30

Glamox ITNSL-01T Specifications

General

Brand	Glamox
Model	ITNSL-01T
Category	Controller
Language	English