Go Power GP-ISW-700 User Manual

[page 4] | gpelectric.com
2.1 CAUTIONS / WARNINGS
This document contains important safety instructions for the products produced by
Go Power. Read all instructions and cautionary markings on the product and on any
accessories or additional equipment included in the installation. Failure to follow these
instructions could result in severe shock or possible electrocution. Use extreme caution at
all times to prevent accidents.
All electrical work must be performed in accordance with local and national electrical codes.
These instructions are for use by qualied personnel who meet all local and governmental
code requirements for licensing and training for the installation of electrical power systems
with AC and DC voltage up to 600 volts.
Installation, maintenance, and connection of inverters must be performed by qualied
personnel, in compliance with local electrical standards, wiring rules, and the requirements
of local power authorities and/or companies.
Safety regulations relevant to the location shall be followed during installation, operation and
maintenance. Improper operation may have a risk of electric shock or damage to equipment
and property.
2. GENERAL INFORMATION

Go Power GP-ISW-700 Specifications

General

Brand	Go Power
Model	GP-ISW-700
Category	Inverter
Language	English