The Gear Stop is a safety system that comprises
two levers to be operated in sequence.
To move the lever
need to unlook the safety
lever
first.
When in the released position with the lever
raised, the clutch is disengaged, the two
-
wheeled
is at a standstill and, if on, the engine will not
switch off.
When in the work position with the lever lowered,
the clutch is engaged, the two
-
wheeled enbloc
with the gearbox and with the PTO if engaged.
Accidental release of the handlebars or the Gear
Stop allows the clutch to can be disengaged and
the two
-
wheeled tractor to consequently stop.