Graham Corporation
28
Section 7 - Warranty
THE FOLLOWING IS IN LIEU OF ALL WARRANTIES OF GRAHAM EXPRESSED OR
IMPLIED AND ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND/OR ANY OTHER OBLIGATION ON THE PART OF GRAHAM ARE
HEREBY EXCLUDED:
Graham, except as otherwise provided, warrants goods of its own manufacture against faulty
workmanship or the use of defective materials, under normal use and service, and that such goods
will conform to mutually agreed upon written specifications, drawings, and is guaranteed to meet
specified performance requirements, for a period of twelve (12) months from date of shipment of
the goods from the factory.
Graham assumes no responsibility for deterioration of the equipment due to corrosion, erosion,
or flow induced tube vibration, or for fouling, maintenance problems or any other causes not
specifically covered under the foregoing warranty. The sole remedy of Buyer with respect to
any part not conforming to any warranty of Graham shall be the repair or, at Graham’s option,
replacement of any defective part at the point of manufacture, Buyer assuming all costs of
removal, shipping, and reinstallation, provided that immediate written notice of the defect has
been given to Graham, and Graham shall not be liable for any other expenses incurred because
of failure of any part to meet Graham’s warranty, nor for any special, indirect or consequential
damages. Material returned to Graham’s factory without its written consent will not be
accepted. No back charges will be honored without Graham’s advance approval of the work to
be performed. Graham’s liability on any claim of any kind, including negligence, for any loss
or damage arising out of, connected with, or resulting from this transaction, or the design,
manufacture, sale, delivery, resale, installation, technical direction of installation, inspection,
repair, operation, or use of any equipment covered by or furnished hereunder shall in no case
exceed the price paid by Buyer for the equipment. Graham also disclaims all liability, whether
in contract, tort, warranty, or otherwise, to any party other than the Buyer.
In the event the pumps are altered or repaired by any person or entity other than Graham,
without written approval by Graham, all warranties are void. Bearings and shaft seals are
warranted only to the extent of, and pursuant to, the original manufacturer's warranty
To Next Page
Loading...
Need help?
General