26
|
BIOBASIC MANUAL
Reversing of door
1. Switch o the power at the mains socket.
2. Dismantle the two screws that hold the control panel at front
and back, pull the panel a little forward, and then tilt it upwards.
3. Dismantle the hinge at pos. A, and lift o the door.
4. Dismantle the hinge at pos. B, and mount it at pos. F.
5. Turn the door 180°, and x it at the hinge pos. F.
6. Mount the hinge from pos. A in pos. D, and move bracket from
pos. C to pos. E.
7. Fasten the control panel again. Apply power to the cabinet.
Applicable to cabinets without self close device and glass door
C A
B
D
E
F
Left hinged Right hinged
To Next Page
Loading...
Need help?
General
