GDS3710 Input/output Alarms
Configuration Guide
Tamper Alarm
Tamper alarm is anti-hack from Hardware level. When this option is checked, if the GDS3710 is removed
from the installation board, it will generate the alarm actions configured. There is an embedded mechanism
on the GDS3710 that allow it to sense when the it is removed.
Table 6: Tamper Alarm
When activating this mode, GDS3710 will keep alarming until the
alarm is dismissed.
Select alarm Action Profile
Select the type of alarms to be taken for the tamper alarm mode.
Keypad Input Error Alarm
Table 7: Keypad Input Error Alarm
Enable Keypad Input Error
Alarm
Enable/Disable the Input Error Alarm, GDS3710 will take alarm actions
every 5 incorrect attempts.
Select the Alarm action to be taken after 5 incorrect attempts.