Version 1 - December 2009 29486
Page 10
www.grant.co.uk
4.1 Prerequisites
Before proceeding with the installation you will require all of the following:
- You must complete the previous section(s) in this document i.e. the device must be
configured and communicating with SquirrelView.
- The users browser must have the latest Java Virtual Machine from Sun Microsys-
tems installed. (See following section)
4.2 Checking the browser JVM Version
Before running the SQ20xx Applet the Java Virtual Machine (JVM) of the browser should be
upgraded to the latest version from Sun Microsystems. To check the JVM on a machine run-
ning Microsoft Internet Explorer perform the following steps:
1. Start Microsoft Internet Explorer browser.
2. Select the ‘Tools’ menus and then the ‘Internet Options..’ menu item.
3. In the next dialog click on the ‘Advanced’ tab.
4. Scroll through the list of items and check for an entry with the title ‘Java (Sun)’. If this
does not exist or the version number is less than ‘Java 2 v1.4.2_04’ then you should
carry out the steps in the ‘Updating the Java JVM’ section.
4.3 Updating the Java JVM
The latest JVM can be downloaded from the web site www.java.com. From this site select the
‘Manual Download’ link and then download the appropriate file for your operating system. If
you are using Microsoft Windows use the ‘Windows (Offline Installation)’ link and double click
on the downloaded file to install the JVM.
4.4 Execution Over an Intranet
You may now run the SQ20xx applet by entering the IP address of the SQ20xx device in a
browser.
This will bring up the SQ20xx Ethernet Configuration and Management window.
- Enter username and password
○ Username – ‘root’ (default)
○ Password – ‘dbps’ (default)
Click on the ‘Set as Default’
This will enable a connection straight to the SQ20xx applet in future when the IP
address is entered into the browser. The Username and Password will need to be
enter each time.
To enter the SQ20xx Ethernet Configuration and Management window after this you will need
to type in the IP address of the 20xx logger followed by /home.htm to the browser.
○ e.g. http://192.168.1.237/home.htm
4. The SQ20xx Applet
To Next Page
Loading...
Need help?
General
