Controls description
Brightness/contrast control:
Pressing left and right increases/decreases display contrast.
Press forward/back increases/decreases brightness.
RX power switch:
The receiver module power is controlled by this switch. Turn off
RX module to avoid video conflict with video source via the AV
cable.
Channel select:
Rocking the channel select switch forward and back will cause
the channel to incrementally increase/decrease. Audio beep
sounds on channel change. A long beep sounds on channel top
and bottom limits.
Note:
Fat Shark only guarantees compatibility with Fat Shark or Immer-
sionRC transmitters.
Selectable channels with frequency
1
2
1. Channel select / Headtracker
reset
2. Antenna SMA
3. Display control
4. AV in/out
5. Power input
3
4
3
1. PS/2 Data port (Head tracker)
2. IPD adjustment
3. RX on/off
4. Earphone jack
1
2
3
4
To Next Page
Loading...
Need help?
General