EN - 19
6. Push bypass levers into operating
position. See Figure 15.
Proper maintenance can prolong the life of
unit. The Maintenance Schedule on page 20
shows the recommended service schedule.
Your Gravely dealer can provide service and
adjustments to keep your unit operating at
peak efficiency. Contact an authorized engine
manufacturer’s service center for engine
service.
More frequent service may be required due to
working conditions (heavy loads, high
ambient temperatures, dusty conditions, or
airborne debris).
See the maintenance instructions in the
Engine Manual for additional information.
SERVICE POSITION
1. Place unit on a flat, level surface.
2. Stop engine, remove key and wait for
moving parts to stop and for hot parts to
cool.
3. Chock wheels. Strap and clamp unit onto
lift, if used.
4. Place steering levers in neutral position
and engage parking brake.
5. Open belt access panel as needed. See
Figure 16.
6. Loosen four rear access pad mounting
bolts.
7. Pull access pad upward and then
rearward to remove. See Figure 17.
MAINTENANCE
WARNING: AVOID INJURY.
Read and understand the
Safety section before
proceeding.
To Next Page
Loading...
Need help?
General
