EasyManuals Logo

Gravely ZT HD 48 User Manual

Gravely ZT HD 48
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background image
EN - 39
SHORT-TERM STORAGE
IMPORTANT: NEVER wash unit with high-
pressure water or store outdoors.
1. Allow unit to cool and clean with mild
soap and water.
2. Tighten all hardware to correct
specifications.
3. Inspect unit for visible signs of wear or
damage. Repair as needed.
4. Prepare fuel system for storage.
NOTICE: Gravely recommends using a
quality fuel stabilizer in all fuel. Gasoline left
in the fuel system without a stabilizer, even
for short periods of time, deteriorates and
leaves gummy deposits in the system that
may damage the carburetor and fuel hoses,
filter and tank. For the best effectiveness, add
stabilizer to all fuel containers whenever
purchasing fuel. Add the stabilizer to the
container before adding fuel.
a. Add fuel stabilizer (see Service Parts
on page 19) or equivalent according
to manufacturer's instructions to the
fuel tank and any fuel containers with
remaining fuel.
b. Run engine outdoors for at least
5 minutes to allow stabilizer to reach
the carburetor.
5. Turn key to off position and remove from
ignition.
6. Store unit in a cool, dry, protected area.
DO NOT store unit outdoors.
LONG-TERM STORAGE
1. Perform short-term storage procedures.
2. Lubricate as directed in Maintenance
Schedule on page 19.
3. Touch-up all scratched painted surfaces.
4. Remove and charge battery as directed
in Install U1 Battery on page 23. Store
battery in a cool, dry, protected area.
5. Store unit in a cool, dry, protected area.
DO NOT store unit outdoors.
START-OF-SEASON
PREPARATION
1. Before adding fuel for the first time after
long-term storage, add fresh, stabilizer-
treated fuel to fuel tank and any fuel
containers with remaining fuel.
2. Charge and install the battery.
See your Gravely dealer for a complete list of
compatible accessories and attachments for
your unit.
STORAGE
ACCESSORIES
Description Part No.
Mulch Kit – 44" 79106700
Mulch Kit – 48" 79105700
Mulch Kit – 52" 79105800
Mulch Kit – 60" 79105900
Headlight Kit 79106800
Rollover Protection Structure
(ROPS) Kit
89100900
Bagger Kit 89116000
Bagger Adapter 44" 79106300
Bagger Adapter 48" 79106400
Bagger Adapter 52" 79106500
Bagger Adapter 60" 79106600
Seat Spring 79107000
Seat Isolator Kit 79106900

Other manuals for Gravely ZT HD 48

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gravely ZT HD 48 and is the answer not in the manual?

Gravely ZT HD 48 Specifications

General IconGeneral
Engine BrandKawasaki
Engine ModelFR691V
Horsepower23 HP
Cutting Width48 inches
Transmission TypeHydro-Gear ZT-3100
Deck Material10-gauge steel
Engine TypeV-Twin
Engine Displacement726cc
Ground Speed Forward8.5 mph
Ground Speed Reverse4 mph
Deck TypeFabricated
Turning RadiusZero-turn
Cutting Height1.5 to 5 inches
Spindle MaterialAluminum
Warranty4 years or 500 hours
Seat TypeHigh-back

Related product manuals