－11 －
COOL MODE OPERATION
COOL
● When temperature of room sensor is higher
than the set temp, compressor runs, the unit starts
cooling operation.
● When temperature of room sensor is lower
than the set temp, compressor stops, the unit runs
in "FAN" mode.
● The set temp should be in range of 16℃~30℃.
ON/OFF
HIGH
TIME
AM
MODE
FAN
SEND
TIMER
DRY
Hr
SLEEP
Min
１８ Ｃ
０
1. After inserting the batteries, press
"ON/OFF" to start the unit.
2. Press "MODE", to choose "COOL"
mode.
3. Press "FAN" , to set fan speed.
4. Press "TEMP" , to set the desired
temp.
5. Press "SEND", send the operation
to the unit.
To Next Page
Loading...
Need help?
General
