－12 －
HEAT MODE OPERATION
(only for cooling/heating type units)
● When the air conditioner was disturbed, the
remote controller can't work once in a while,
only to pull out the power plug, after reinserting
it, it can be operated.
● Is the voltage of the batteries full or not,
otherwise to replace the worn batteries.
● When the LCD of the remote controller
couldn't display the all set contents clearly, or
the set options couldn't be received, please
replace the batteries.
The compressor and lower motor stop running,
only PTC is running, the upper motor is running
at the set fan speed.
HEAT
ON/OFF
HIGH
TIME
AM
MODE
FAN
SEND
TIMER
DRY
Hr
SLEEP
Min
1. After inserting the batteries, press
"ON/OFF" to start the unit.
2. Press "MODE" , to choose "HEAT"
mode.
3. Press "TEMP" , to set the desired
temp.
4. Press "FAN", to set fan speed.
5. Press "SEND", send the operation
to the unit.
To Next Page
Loading...
Need help?
General
