Wired Controller XK55
35
6 Special Functions
6.1 Remote Shielding
Remote shielding function: remote monitor or centralized controller can shield
the remote control or button operation of related functions of wired controller and
make the operation invalid, thus realizing the remote control function.
Remote shielding function is divided to complete shielding and part shielding. In
complete shielding, all remote or button operation for the wired controller will be
invalid; in part shielding, remote or button operation for the shielded functions of
wired controller will be invalid.
When remote monitor or centralized controller is conducting remote shielding for
the wired controller, status on homepage will display
. If the user is conducting
remote or button operation for the wired controller, the operation will be invalid.
6.2 Access Display
When there’s an access control system, the wired controller has the functions of
“work with card and stop without card”. Remove the card and re-insert it, operation
will be resumed based on the settings memorized. If the card is not inserted (or not
well inserted), this icon
will appear; when the user is conducting remote control or
button operation for the wired controller, the operation is invalid and icon “
” will
blink for alarm.
NOTE: wired controller of this model shall not be connected with entrance guard
To Next Page
Loading...
Need help?
General
