Groen TDH Series Operator's Manual

14 OM-TDH(C)-20/24/40/48 (C,A,C2T™) Domestic
Parts List
Key Description Part No.
1 WELDMENT, BASE 137060
2 WELDMENT, PEDESTAL 174792
3 WELDMENT, BASE SUPPORT 124729
4 WASHER LOCK 1/2" S.S. 005657
5 SCREW, HEX HD 1/2-13 X 1 1/4" 005623
6 NUT HEXAGON 1/2" - 13 005603
7 SCREW TRUSS HD 1/4-20 X 1/2 S.S. 012700
8 ASM, CABINET WELD 174799
9 SHROUD BURNER WELD ASM 135526
10 SHIELD, PILOT 135524
11 BURNER BRACKET WELD ASM. 135527
12 BRACKET, BURNER SUPPORT 137353
13 SCREW, TRUSS HD #8-32 X 3/8" 005764
14 SCREW, HED HD 1/4"-20 X 1/2" 005608
15 WASHER LOCK 1/4" 005655
16 SCREW HEX HD CAP 1/4"-20 X 1-1/2" 005649
17 NUT HEXAGON KEPS 1/4" - 20 012940
18 PLATE SHROUD WELD ASM 137680
19 SEAL TRUNNION 137005
20 PLATE, SHROUD WELD ASM (5/6-QT) 137700
20 PLATE, SHROUD WELD ASM (10/12-QT) 137380
21
GASKET, 3/8" THK X 1/2" WIDE, 6"
CENTER
137588
22 E-RING, 1.875" DIA 138357
23 FAUCET BRACKET 137738
24 GROMMET 7/8" ID X 1-5/8" OD 007400
25 COVER, CABINET 175309
26 SCREW, 10-32 X 1/2" COMBI HEAD 137766
27 CONNECTOR STRAIGHT 3/8" SEALTITE 001669
28 HARNESS ASM 137006
29 HARNESS ASM HIGH VOLTAGE 137546
30 STRAP CABLE TY-RAP 011093
31 SEALANT RTV #732, GREY 001711
32 O-RING #018 138359
33 E-RING, 1.00" 138356
34 COLLAR, SHAFT SEAL, .750" 138354
35 SEAL, SHAFT 1.00" 136088
Crank Tilt Units Only

Groen TDH Series Specifications

General

Brand	Groen
Model	TDH Series
Category	Kettle
Language	English