7
MS Motors
Features
MS 402
• Complete Range of Motors from 1/3 - 2 Hp 1 ph,
2-wire; 3-wire and 3 Ph.
• Designed for 4" and Larger Wells
• Corrosion Resistance All Stainless Steel Exterior
Construction
• Cast Stainless Steel Machined Top
• Stainless Steel Splined Shaft
• Stator Windings Hermetically Encapsulated in Stain-
less Steel
• Polyurethane Self Healing Resin
• 900 lb. Thrust Rating
• Water Lubricated
• Internal Water Circulation System Enhances Motor
Cooling
• No Cooling Sleeve Needed up to 85°F
• Rated up to 104°F with 1/2 ft./sec. flow Past
the Motor
• Filter Check Valve
• Michell Type Carbon/Ceramic Thrust Bearing
• Pressure Equalization Diaphragm
• Sand Slinger
• Bellows Type Shaft-Seal
• Epoxy Coated Bearing Support
• Built-In Surge Protection
• Replaceable Motor Lead
• NEMA Mounting Dimensions
• UL Recognized
• CSA Certified
2-wire motors are only available up to 1.5 Hp
65495 0205
MS.book Page 7 Wednesday, January 26, 2005 3:25 PM
To Next Page
Loading...
Need help?
General
