9
MS 6000
• Complete Range of Motors from 7 1/2 - 40 Hp 3 Ph
• Designed for 6" and Larger Wells
• Corrosion Resistance All Stainless Steel Exterior
Construction
• Stainless Steel Splined Shaft
• Stator Windings Hermetically Encapsulated in Stain-
less Steel
• Water Lubricated
• Internal Water Circulation System Enhances Motor
Cooling
• No Cooling Sleeve Needed up to 85°F
• Rated up to 104°F with 1/2 ft./sec. flow Past
the Motor
• Filtered Check Valve
• Michell Type Carbon/Ceramic Thrust Bearing
• 6000 lb. Thrust Rating
• Pressure Equalization Diaphragm
• Sand Slinger
• Tungsten Carbide/Ceramic Shaft-Seal, standard
• Optional Silicon/Carbide Shaft-Seal, for Long Life in
Sandy Applications
• Steel Bearing Support
• Equipped With Tempcon Temperature Sensor as
Standard
• Work with MTP 75 and CU 3 Motor Protection
System
• Replaceable Motor Lead
• NEMA Mounting Dimensions
• CSA Certified
Special Construction Features
• Available in a 904L Grade of Stainless Steel and/or
FKM, for aggressive Applications
• Available In an Industrial Version for
Industrial Applications
• Designed for Long Life and Lower operating Costs.
GR7291
Features
MS Motors
MS.book Page 9 Wednesday, January 26, 2005 3:25 PM
To Next Page
Loading...
Need help?
General
