8
Features
MS Motors
MS 4000
• Complete Range of Motors from 3 - 10 Hp 1 ph,
3-wire and 3 Ph.
• Designed for 4" and Larger Wells
• Corrosion Resistance All Stainless Steel Exterior
Construction
• Stainless Steel Splined Shaft
• Stator Windings Hermetically Encapsulated in Stain-
less Steel
• Water Lubricated
• Internal Water Circulation System Enhances Motor
Cooling
• No Cooling Sleeve Needed up to 85°F
• Rated up to 104°F with 1/2 ft./sec. flow Past
the Motor
• Filter Check Valve
• Michell Type Carbon/Ceramic Thrust Bearing
• 1500 lb. Thrust Rating
• Pressure Equalization Diaphragm
• Sand Slinger
• Tungsten Carbide/Ceramic Shaft-Seal, for Long Life
in Sandy Applications
• Steel Bearing Support
• 7 1/2 and 10 Hp Equipped with Tempcon
Temperature Sensor
• 3 Ph Motors Work with MTP 75 and CU 3 Motor Pro-
tection System
• Replaceable Motor Lead
• NEMA Mounting Dimensions
• CSA Certified
Special Construction Features
• Available in a 904L Grade of Stainless Steel and/or
FKM, for aggressive Applications
• Available In an Industrial Version for
Industrial Applications
• Designed for Long Life and Lower operating Costs.
Tempcon optional on 3 and 5 HP
65492 0205
MS.book Page 8 Wednesday, January 26, 2005 3:25 PM
To Next Page
Loading...
Need help?
General
