EasyManuals Logo
Home>Haier>Heat Pump>2U18MS2VHB

Haier 2U18MS2VHB User Manual

Haier 2U18MS2VHB
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Topic Title
INTRODUCTION
A-2
ENGLISH
Safety & Precautions
• Read these Safety Precautions carefully to ensure correct installation.
•ThismanualclassiestheprecautionsbyWARNINGandCAUTION.
• Follow all precautions below. They are all important for ensuring safety and preventing property/equipment damage.
!
WARNING: Failure to follow any of WARNING is likely to result in grave consequences such as death or serious injury.
!
CAUTION: Failure to follow any of CAUTION may, in some cases, result in grave consequences.
• The following safety symbols are used throughout this manual:
Observe this instruction
Establish an earth connection
Neverattempt
• After completing installation, test the unit to checkforinstallationerrors.Givetheuseradequateinstructionsconcerningthe
use and cleaning of the unit according to the Operation Manual.
!
WARNING
• Installation should be performed by the dealer or another professional.
Improperinstallationmaycausewaterleakage,electricalshock,orre.
• Install the heat pump according to the instructions given in this manual.
Incompleteinstallationmaycausewaterleakage,electricalshock,orre.
•Useonlythesuppliedorspeciedinstallationparts.
Useofotherpartsmaycausetheunittocomelose,waterleakage,electricalshock,orre.
• Install the heat pump on a solid base that can support the unit’s weight.
Aninadequatebaseorincompleteinstallationmaycauseinjuryintheeventtheunitfallsothebase.
• Electrical work should be carried out in accordance with the installation manual and national/local electrical wiring codes and
rules of practice.
Insucientcapacityorincompleteelectricalworkmaycauseelectricalshockorre.
•Useadedicatedpowercircuit.Neveruseapowersupplysharedbyanotherappliance.
• For wiring, use a cable long enough to cover the entire distance with no splices.
Do not use an extension cord. Do not put other loads on the power supply, use a dedicated power circuit.
(Failuretodosomaycauseabnormalheat,electricshockorre.)
•Useonlythespeciedwiretypesforelectricalconnectionsbetweentheindoorandoutdoorunits.
Firmly clamp the interconnecting wires so they receive no external stresses. Incomplete connections or clamping may cause terminal over-
heatingorre.
• After completing interconnecting and supply wiring connections, shape the cables so that they do not put undue force on the
electrical covers or panels.
Installcoversoverthewires.Incompletecoverinstallationmaycauseterminaloverheating,electricalshock,orre.
• If any refrigerant has leaked out during the installation work, ventilate the room.
(Therefrigerantproducesatoxicgasifexposedtoame.)
• After all installation is complete, check for and repair any system refrigerant leaks.
(Therefrigerantproducesatoxicgasifexposedtoames.)
•Wheninstallingorrelocatingthesystem,keeptherefrigerantcircuitfreefromsubstancesotherthanthespecied
refrigerant (R410A), such as air.
(The presence of air or other foreign substance in the refrigerant circuit causes an abnormal pressure rise or rupture, resulting in injury.)
• During pump-down, stop the compressor before removing the refrigerant piping.
If the compressor is still running, and the stop valve is open during pump-down, air will be sucked into the system while the compressor is
running. This will cause abnormal pressure and noncondensables added to the system.
• Be sure to establish a ground. Do not ground the unit to a utility pipe, arrester, or telephone earth.
Ancompleteearthmaycauseelectricalshock,orre.Ahighsurgecurrentfromlightningorothersourcesmay
cause damage to the heat pump.
!
CAUTION
•Donotinstalltheheatpumpinaplacewherethereisdangerofexposuretoammablegas.
Ifthegasbuildsuparoundtheunit,itmaycatchre.
• Install drain piping according to the instructions of this manual.
Inadequatepipingmaycauseooding.
•Tightenthearenutaccordingtothespeciedtorqueusingatorquewrench.
Ifthearenutisovertightened,thearenutmayeventuallycrackandcauserefrigerantleakage.
• Provide adequate measures to prevent the outdoor unit from being used as a shelter by rodents.
Rodentsmakingcontactwithelectricalpartscancausemalfunctions,smokeorre.Pleaseinstructthecustomertokeeptheareaaround
the unit clean.

Table of Contents

Other manuals for Haier 2U18MS2VHB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier 2U18MS2VHB and is the answer not in the manual?

Haier 2U18MS2VHB Specifications

General IconGeneral
BrandHaier
Model2U18MS2VHB
CategoryHeat Pump
LanguageEnglish

Related product manuals